Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2021 · Catálogo consolidado

DSP-HIL Comparison between IM Drive Control Strategies

Electronics

Luis E. Ortega-García Instituto Tecnológico de Celaya, Tecnológico Nacional de México, Celaya 38010, Guanajuato, Mexico
Daniela Rodriguez-Sotelo Instituto Tecnológico de Celaya, Tecnológico Nacional de México, Celaya 38010, Guanajuato, Mexico
Jose C. Nuñez-Perez Centro de Investigación y Desarrollo de Tecnología Digital, Instituto Politécnico Nacional, Tijuana 22435, Baja California, Mexico
Yuma Sandoval-Ibarra Departamento de Posgrado, Universidad Politécnica de Lázaro Cárdenas (UPLC), Lázaro Cárdenas 60950, Michoacán, Mexico
Francisco J. Perez-Pinal ORCID Instituto Tecnológico de Celaya, Tecnológico Nacional de México, Celaya 38010, Guanajuato, Mexico

Resumen

Due to their high robustness and simple maintenance, induction motors (IM) are commonly applied in household appliances and industry. Recently, advanced control techniques are being applied to traditional controllers such as field-oriented control (FOC) and torque control (DTC). Dynamic performance improvement, hardware simplification and software resource reduction are some of the characteristics reported by these advanced techniques, where a comparison of the new proposal with a traditional structure is generally reported for its validation. However, an assessment between advanced techniques is usually missing. Therefore, we evaluated the traditional FOC and DTC with two additional advanced control modifications, fuzzy and predictive. The resulting six structures were numerically evaluated using MATLAB SIMULINK in a 5 HP four-pole three-phase IM and practically validated using hardware-in-the-loop (Typhoon HIL 402 and DSP TMS320F28035). Speed, torque, phase current and flux response are reported for the six controllers and practical insights are summarized.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

Luis E. Ortega-García; Daniela Rodriguez-Sotelo; Jose C. Nuñez-Perez; Yuma Sandoval-Ibarra; Francisco J. Perez-Pinal. (2021). DSP-HIL Comparison between IM Drive Control Strategies. Electronics, 10(8), 921. https://doi.org/10.3390/electronics10080921

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.