Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2023 · Catálogo consolidado

Development of a Hardware-in-the-Loop Platform for the Validation of a Small-Scale Wind System Control Strategy

Energies

Juan Martínez-Nolasco ORCID Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México, Instituto Tecnológico de Celaya, Celaya 38010, Mexico
Víctor Sámano-Ortega ORCID Doctorado en Ciencias de la Ingeniería, Tecnológico Nacional de México, Instituto Tecnológico de Celaya, Celaya 38010, Mexico
José Botello-Álvarez Doctorado en Ciencias de la Ingeniería, Tecnológico Nacional de México, Instituto Tecnológico de Celaya, Celaya 38010, Mexico
José Padilla-Medina ORCID Departamento de Ingeniería Electrónica, Tecnológico Nacional de México, Instituto Tecnológico de Celaya, Celaya 38010, Mexico
Coral Martínez-Nolasco ORCID Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México, Instituto Tecnológico de Celaya, Celaya 38010, Mexico
Micael Bravo-Sánchez ORCID Doctorado en Ciencias de la Ingeniería, Tecnológico Nacional de México, Instituto Tecnológico de Celaya, Celaya 38010, Mexico

Resumen

The use of renewable energies contributes to the goal of mitigating climate change by 2030. One of the fastest-growing renewable energy sources in recent years is wind power. Large wind generation systems have drawbacks that can be minimized using small wind systems and DC microgrids (DC-µGs). A wind system requires a control system to function correctly in different regions of its operating range. However, real-time analysis of a physical wind system may not be feasible. An alternative to counteract this disadvantage is using real-time hardware in the loop (HIL) simulation. This article describes the implementation of an HIL platform in an NI myRIO 1900 to evaluate the performance of control algorithms in a small wind system (SWS) that serves as a distributed generator for a DC-µG. In the case of an SWS, its implementation implies nonlinear behaviors and, therefore, nonlinear equations, and this paper shows a way to do it by distributing the computational work, using a high-level description language, and achieving good accuracy and latency with a student-oriented development kit. The platform reproduces, with an integration time of 10 µs, the response of the SWS composed of a 3.5 kW turbine with a fixed blade pitch angle and no gear transmission, a permanent magnet synchronous generator (PMSG), and a three-phase full-bridge AC/DC electronic power converter. The platform accuracy was validated by comparing its results against a software simulation. The compared variables were the PMSG currents in dq directions, the turbine’s angular speed, and the DC bus’s voltage. These comparisons showed mean absolute errors of 0.04 A, 1.9 A, 0.7 rad/s, and 9.5 V, respectively. The platform proved useful for validating the control algorithm, exhibiting the expected results in comparison with a lab-scale prototype using the same well-known control strategy. Using a well-known control strategy provides a solid reference to validate the platform.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

Juan Martínez-Nolasco; Víctor Sámano-Ortega; José Botello-Álvarez; José Padilla-Medina; Coral Martínez-Nolasco; Micael Bravo-Sánchez. (2023). Development of a Hardware-in-the-Loop Platform for the Validation of a Small-Scale Wind System Control Strategy. Energies, 16(23), 7813. https://doi.org/10.3390/en16237813

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.