Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2021 · Catálogo consolidado

Measurements of the Magnetic Field Variations Related with the Size of V-Shaped Notches in Steel Pipes

Applied Sciences

J. Jesús Villegas-Saucillo ORCID Instituto Tecnológico de Celaya, Celaya 38020, Mexico
José Javier Díaz-Carmona ORCID Instituto Tecnológico de Celaya, Celaya 38020, Mexico
Marco A. Escarola-Rosas Maestría en Ingeniería Aplicada, Facultad de Ingeniería de la Construcción y el Hábitat, Universidad Veracruzana, Boca del Río 94294, Mexico
Héctor Vázquez-Leal ORCID Electronic Instrumentation and Atmospheric Sciences School, Universidad Veracruzana, Xalapa 91000, Mexico; Consejo Veracruzano de Investigación Científica y Desarrollo Tecnológico (COVEICYDET), Xalapa 91069, Mexico
Jaime Martínez-Castillo ORCID Micro and Nanotechnology Research Center, Universidad Veracruzana, Boca del Río 94294, Mexico
Agustín L. Herrera-May ORCID Maestría en Ingeniería Aplicada, Facultad de Ingeniería de la Construcción y el Hábitat, Universidad Veracruzana, Boca del Río 94294, Mexico; Micro and Nanotechnology Research Center, Universidad Veracruzana, Boca del Río 94294, Mexico

Resumen

Gas and oil pipeline networks require periodic inspections to detect cracks or notches that can cause industrial accidents and environmental contamination. For these inspections, the metal magnetic memory (MMM) method could be used as a non-destructive testing (NDT) technique, which does not need expensive equipment and high-skilled operators. However, more investigations are required to quantify the size and shape of defects in ferromagnetic pipes using the MMM signals. We present experimental measurements of MMM signals around five small V-shaped notches of an ASTM-A36 steel pipe using a three-axis magnetoresistive sensor. The V-shaped notches have different values of depth (500 µm, 1000 µm, 1500 µm, 2000 µm and 2500 µm) and width (1000 µm, 1500 µm, 2000 µm, 3000 µm and 3500 µm). We measured the variations of tangential and normal MMM signals around these defects and their relationships with the size of each defect. The first V-notch defect (500 μm depth and 1000 μm width) registers variations of the tangential and normal MMM signals of 14.32 μT ± 1.62 μT and 27.95 μT ± 1.14 μT, respectively. On the other hand, the fifth V-notch defect (2500 μm depth and 3500 μm width) has variations of the tangential and normal MMM signals of 68.75 μT ± 1.10 μT and 71.37 μT ± 0.72 μT, respectively. The MMM method could be used for real-time monitoring of V-shaped notches in steel pipes. This method does not require special treatment of steel pipes.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

J. Jesús Villegas-Saucillo; José Javier Díaz-Carmona; Marco A. Escarola-Rosas; Héctor Vázquez-Leal; Jaime Martínez-Castillo; Agustín L. Herrera-May. (2021). Measurements of the Magnetic Field Variations Related with the Size of V-Shaped Notches in Steel Pipes. Applied Sciences, 11(9), 3940. https://doi.org/10.3390/app11093940

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.