Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2018 · Catálogo consolidado

A Reconfigurable Buck, Boost, and Buck-Boost Converter: Unified Model and Robust Controller

Mathematical Problems in Engineering

Martín Antonio Rodríguez Licea ORCID CONACYT-Instituto Tecnológico de Celaya, Departamento de Ingeniería Electrónica, 38010 Celaya, GTO, Mexico
Francisco Javier Perez Pinal Instituto Tecnológico de Celaya, Departamento de Ingeniería Electrónica, 38010 Celaya, GTO, Mexico
Alejandro Israel Barranco Gutiérrez ORCID CONACYT-Instituto Tecnológico de Celaya, Departamento de Ingeniería Electrónica, 38010 Celaya, GTO, Mexico
Carlos Alonso Herrera Ramírez CONACYT-Instituto Tecnológico de Celaya, Departamento de Ingeniería Electrónica, 38010 Celaya, GTO, Mexico
Jose Cruz Nuñez Perez Instituto Politécnico Nacional, CITEDI, 22435 Tijuana, BC, Mexico

Resumen

The need for reconfigurable, high power density, and low-cost configurations of DC-DC power electronic converters (PEC) in areas such as the transport electrification and the use of renewable energy has spread out the requirement to incorporate in a single circuit several topologies, which generally result in an increment of complexity about the modeling, control, and stability analyses. In this paper, a reconfigurable topology is presented which can be applied in alterative/changing power conversion scenarios and consists of a reconfigurable Buck, Boost, and Buck-Boost DC-DC converter (RBBC). A unified averaged model of the RBBC is obtained, a robust controller is designed through a polytopic representation, and a Lyapunov based switched stability analysis of the closed-loop system is presented. The reported RBBC provides a wide range of voltage operation, theoretically from -∞ to ∞ volts with a single power source. Robust stability, even under arbitrarily fast (bounded) parameter variations and reconfiguration changes, is reported including numerical and experimental results. The main advantages of the converter and the robust controller proposed are simple design, robustness against abrupt changes in the parameters, and low cost.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

Martín Antonio Rodríguez Licea; Francisco Javier Perez Pinal; Alejandro Israel Barranco Gutiérrez; Carlos Alonso Herrera Ramírez; Jose Cruz Nuñez Perez. (2018). A Reconfigurable Buck, Boost, and Buck-Boost Converter: Unified Model and Robust Controller. Mathematical Problems in Engineering, 2018, 1-8. https://doi.org/10.1155/2018/6251787

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

http://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.