Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2026 · Catálogo consolidado

Intelligent Temperature Control Using Artificial Neural Networks in an IoT-Enabled Cyber-Physical Hot-Air Drying System: Analysis of Drying Kinetics and Thermal Efficiency

AI

Juan Manuel Tabares-Martinez ORCID Departamento de Posgrado e Investigación (DEPI), Tecnológico Nacional de México (TecNM), Instituto Tecnológico de Celaya (ITC), Celaya 38010, Guanajuato, Mexico
Adriana Guzmán-López ORCID Departamento de Ingeniería Bioquímica e Ingeniería Ambiental, Tecnológico Nacional de México (TecNM), Instituto Tecnológico de Celaya (ITC), Celaya 38010, Guanajuato, Mexico
Micael Gerardo Bravo-Sánchez ORCID Departamento de Ingeniería Bioquímica e Ingeniería Ambiental, Tecnológico Nacional de México (TecNM), Instituto Tecnológico de Celaya (ITC), Celaya 38010, Guanajuato, Mexico
Francisco Villaseñor-Ortega ORCID Departamento de Ingeniería Bioquímica e Ingeniería Ambiental, Tecnológico Nacional de México (TecNM), Instituto Tecnológico de Celaya (ITC), Celaya 38010, Guanajuato, Mexico
Juan José Martínez-Nolasco ORCID Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México (TecNM), Instituto Tecnológico de Celaya (ITC), Celaya 38010, Guanajuato, Mexico
Alejandro Israel Barranco-Gutierrez ORCID Departamento de Ingeniería Electrónica, Tecnológico Nacional de México (TecNM), Instituto Tecnológico de Celaya (ITC), Celaya 38010, Guanajuato, Mexico

Resumen

This study aims to develop and experimentally evaluate an artificial neural network-based temperature control strategy for hot-air carrot drying within an IoT-enabled cyber-physical system. The experimental setup employs an Arduino Mega 2560 equipped with AM2302 (air temperature sensor), MLX90614 (infrared surface temperature sensor), and SHT35 (relative humidity sensor), an HX711 load cell, and a WS68 anemometer, with cloud communication provided by an ESP8266 module for remote monitoring via Wi-Fi. The neural controller, implemented using the Arduino Neurona library, regulates the dryer temperature in real time, enabling drying kinetics analysis under ANN-based thermal control to investigate its capability to maintain thermal stability. Three initial loads (2, 4, and 6 kg) were analyzed to determine the thermal efficiency. In the dehydration experiments, the 2 kg load reached a final moisture content of 10% in 4.4 h, consuming 1390 kJ with a thermal efficiency of 83%. The 4 kg load exhibited the best time–energy balance (6.6 h, 1850.0 kJ, 88%), while the 6 kg load achieved the highest efficiency (8.1 h, 2250.0 kJ, 91%). These results demonstrate the effectiveness of neural-network-based control implemented on low-cost microcontrollers to enhance thermal efficiency in food dehydration processes.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

Juan Manuel Tabares-Martinez; Adriana Guzmán-López; Micael Gerardo Bravo-Sánchez; Francisco Villaseñor-Ortega; Juan José Martínez-Nolasco; Alejandro Israel Barranco-Gutierrez. (2026). Intelligent Temperature Control Using Artificial Neural Networks in an IoT-Enabled Cyber-Physical Hot-Air Drying System: Analysis of Drying Kinetics and Thermal Efficiency. AI, 7(5), 157. https://doi.org/10.3390/ai7050157

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.