Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2024 · Catálogo consolidado

Inspection of Semi-Elliptical Defects in a Steel Pipe Using the Metal Magnetic Memory Method

Applied Sciences

J. Jesús Villegas-Saucillo ORCID Departamento de Ingeniería Eléctrica y Electrónica, Tecnológico Nacional de México en Celaya, Celaya 38020, Guanajuato, Mexico
Jose Javier Diaz-Carmona ORCID Departamento de Ingeniería Eléctrica y Electrónica, Tecnológico Nacional de México en Celaya, Celaya 38020, Guanajuato, Mexico
Juan Prado-Olivares ORCID Departamento de Ingeniería Eléctrica y Electrónica, Tecnológico Nacional de México en Celaya, Celaya 38020, Guanajuato, Mexico
Monserrat Sofia López-Cornejo ORCID Departamento Metal Mecánica, Tecnológico Nacional de México en Morelia, Morelia 58120, Michoacán, Mexico
Ernesto A. Elvira-Hernández Facultad de Ingeniería Mecánica y Ciencias Navales, Universidad Veracruzana, Boca del Río 94294, Veracruz, Mexico
Carlos A. Cerón-Álvarez Facultad de Ingeniería Eléctrica y Electrónica, Universidad Veracruzana, Boca del Río 94294, Veracruz, Mexico
Agustín L. Herrera-May ORCID Micro and Nanotechnology, Reasearch Center, Universidad Veracruzana, Boca del Río 94294, Veracruz, Mexico; Maestría en Ingeniería Aplicada, Facultad de Ingeniería de la Construcción y el Hábitat, Universidad Veracruzana, Boca del Río 94294, Veracruz, Mexico

Resumen

Ferromagnetic pipes are widely used for fluid transportation in various industries. The failure of these ferromagnetic pipes due to surface defects can generate industrial accidents, economic losses, and environmental pollution. Non-destructive testing techniques are required to detect these surface defects. An alternative is the metal magnetic memory (MMM) method, which can be employed to detect surface flaws in ferromagnetic structures. Based on this method, we present an analysis of experimental results of the magnetic field variations around five different surface semi-elliptical defects of an ASTM A36 steel pipe. A measurement system of MMM signals is implemented with a rotatory mechanism, a magnetoresistive sensor, a data processing unit, and a control digital unit. The MMM method does not require expensive equipment or special treatment of the ferromagnetic structures. In order to research a potential relationship between the defect sample size and the measured MMM signals, variable defect dimensions are experimentally considered. According to these results, the shape and magnitude of the normal and tangential MMM signals are altered by the superficial semi-elliptical defects. In particular, the maximum and mean tangential components and the maximum and minimum normal components are related to the defect dimensions. The proposed measurement system can be used to study the behavior of magnetic field variations around surface defects of ferromagnetic pipes. This system can be adapted to measure the position and damage level of small defects on the surface of ferromagnetic pipes.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

J. Jesús Villegas-Saucillo; Jose Javier Diaz-Carmona; Juan Prado-Olivares; Monserrat Sofia López-Cornejo; Ernesto A. Elvira-Hernández; Carlos A. Cerón-Álvarez; Agustín L. Herrera-May. (2024). Inspection of Semi-Elliptical Defects in a Steel Pipe Using the Metal Magnetic Memory Method. Applied Sciences, 14(12), 5308. https://doi.org/10.3390/app14125308

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.