Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2024 · Catálogo consolidado

On the dual-phase-lag thermal response in the pulsed photoacoustic effect: A theoretical and experimental 1D-approach

Journal of Applied Physics

L. F. Escamilla-Herrera ORCID División de Ciencias e Ingenierías Campus León, Universidad de Guanajuato 1 , A.P. E-143, León, Guanajuato CP 37150,
J. M. Derramadero-Domínguez ORCID Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México/Instituto Tecnológico de Celaya 2 , Av. Antonio García Cubas 600, Celaya, Guanjuato 38010,
O. M. Medina-Cázares ORCID División de Ciencias e Ingenierías Campus León, Universidad de Guanajuato 1 , A.P. E-143, León, Guanajuato CP 37150,
J. E. Alba-Rosales ORCID Centro de Investigaciones en Óptica AC 3 , Loma del Bosque, 115, León, Guanjuato, CP 37150,
F. J. García-Rodríguez ORCID Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México/Instituto Tecnológico de Celaya 2 , Av. Antonio García Cubas 600, Celaya, Guanjuato 38010,
G. Gutiérrez-Juárez ORCID División de Ciencias e Ingenierías Campus León, Universidad de Guanajuato 1 , A.P. E-143, León, Guanajuato CP 37150,

Resumen

In a recent work, assuming a Beer–Lambert optical absorption and a Gaussian laser time profile, it was shown that the exact solutions for a 1D photoacoustic (PA) boundary-value-problem predict a null pressure for optically strong absorbent materials. In order to overcome this inconsistency, a heuristic correction was introduced by assuming that heat flux travels a characteristic length during the duration of the laser pulse [M. Ruiz-Veloz et al., J. Appl. Phys. 130, 025104 (2021)] τp. In this work, we obtained exact analytical solutions in the frequency domain for a 1D boundary-value-problem for the Dual-Phase-Lag (DPL) heat equation coupled with a 1D PA-boundary-value-problem via the acoustic wave equation. Temperature and pressure solutions were studied by assuming that the sample and its surroundings have a similar characteristic thermal lag response time τT; therefore, the whole system is assumed to have a similar thermal relaxation. A second assumption for τT is that it is considered as a free parameter that can be adjusted to reproduce experimental results. Solutions for temperature and pressure were obtained for a one-layer 1D system. It was found that for τT<τp, the DPL temperature has a similar thermal profile of the Fourier heat equation; however, when τT≥τp, this profile is very different from the Fourier case. Additionally, via a numerical Fourier transform, the wave-like behavior of DPL temperature is explored, and it was found that as τT increases, thermal wave amplitude is increasingly attenuated. Exact solutions for pressure were compared with experimental PA signals, showing a close resemblance between both data sets, particularly in time domain, for an appropriated value of τT; the transference function was also calculated, which allowed us to find the maximum response in frequency for the considered experimental setup.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

L. F. Escamilla-Herrera; J. M. Derramadero-Domínguez; O. M. Medina-Cázares; J. E. Alba-Rosales; F. J. García-Rodríguez; G. Gutiérrez-Juárez. (2024). On the dual-phase-lag thermal response in the pulsed photoacoustic effect: A theoretical and experimental 1D-approach. Journal of Applied Physics, 136(17). https://doi.org/10.1063/5.0226434

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by/4.0/

https://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.