Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2025 · Catálogo consolidado

Development of a load cell to measure axial force

Revista de Invención Técnica

Alvaro Sánchez-Rodríguez ORCID National Technological Institute of Mexico
Salvador M. Aceves ORCID National Technological Institute of Mexico
Horacio Orozco-Mendoza ORCID National Technological Institute of Mexico
Ramón Rodríguez Castro ORCID National Technological Institute of Mexico

Resumen

Original development of a load cell to reliably measure axial force in constant velocity axles and sliding constant velocity joints, which meets the characteristics to be installed especially in a dynamic Noise Vibration and hardness [NVH] test rig where parameters and variables similar to those present in vehicles under real conditions are reproduced; through the use of strain gages in a Wheatstone bridge arrangement and applying pure bending theory in the linear elastic range. The cell calibration results show linear behavior to measure the axial force value with an uncertainty of 0.5836 and a reliability value of 95% and an absolute error of 1.022 to ensure reliable measurement with errors less than 5%.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

Alvaro Sánchez-Rodríguez; Salvador M. Aceves; Horacio Orozco-Mendoza; Ramón Rodríguez Castro. (2025). Development of a load cell to measure axial force. Revista de Invención Técnica. https://doi.org/10.35429/joti.2025.9.22.2.1.7

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by-nc-nd/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.