Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2019 · Catálogo consolidado

Improvement Effect of Green Lubricants on the Tribological and Mechanical Performance of 4140 Steel

Applied Sciences

María T. Hernández-Sierra ORCID Tecnológico Nacional de México en Celaya, Apartado Postal 57, 38010-Celaya, Guanajuato, Mexico
Micael G. Bravo-Sánchez ORCID Tecnológico Nacional de México en Celaya, Apartado Postal 57, 38010-Celaya, Guanajuato, Mexico
José E. Báez Facultad de Química, Universidad de Guanajuato, Noria Alta S/N, 36050-Guanajuato, Guanajuato, Mexico
Luis D. Aguilera-Camacho Tecnológico Nacional de México en Celaya, Apartado Postal 57, 38010-Celaya, Guanajuato, Mexico
J. Santos García-Miranda ORCID Tecnológico Nacional de México en Celaya, Apartado Postal 57, 38010-Celaya, Guanajuato, Mexico
Karla J. Moreno ORCID Tecnológico Nacional de México en Celaya, Apartado Postal 57, 38010-Celaya, Guanajuato, Mexico

Resumen

Although much has been learned and investigated about environmentally friendly lubricants in recent years, several issues remain critical to their use in specific applications. A key point that could be limiting their utilization is that the effect of green lubricants on the tribological and mechanical properties of the elements has not been thoroughly studied since such attributes determine their performance in industrial applications. For this reason, in this research, the effect of green lubrication on the tribological and hardness properties of AISI 4140 steel was studied. The performance of three bio-based lubricants was studied and compared to that of five of the most representative lubricants. First, the lubricants were chemically and physically characterized. Then, the effect of each lubricant on the friction and wear behavior of the system was analyzed by kinetic friction coefficient, wear rate calculations, and microhardness measurements. In general, the bio-based lubricants exhibited the lowest values of friction and wear. Further the mechanical properties of the systems lubricated by these lubricants were not affected or were affected to a lesser degree.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

María T. Hernández-Sierra; Micael G. Bravo-Sánchez; José E. Báez; Luis D. Aguilera-Camacho; J. Santos García-Miranda; Karla J. Moreno. (2019). Improvement Effect of Green Lubricants on the Tribological and Mechanical Performance of 4140 Steel. Applied Sciences, 9(22), 4896. https://doi.org/10.3390/app9224896

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.