Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2022 · Catálogo consolidado

Design, development, and experimental setup of near-field electrospinning with a sharp electrode: Influence of procedural parameters on the 3D nanofiber structure

Review of Scientific Instruments

Juan A. de la Rosa Gatica Tecnológico Nacional de México–Campus Querétaro, División de Estudios de Posgrado e Investigación 1 , 76000 Querétaro, Mexico
Ana L. Martínez Hernández ORCID Tecnológico Nacional de México–Campus Querétaro, División de Estudios de Posgrado e Investigación 1 , 76000 Querétaro, Mexico
Nimrod Vázquez-Nava ORCID Tecnológico Nacional de México–Campus Celaya, Departamento de Electrónica 2 , 38010 Celaya, Guanajuato, Mexico
Perla E. García-Casillas Instituto de Ingeniería y Tecnología, Universidad Autónoma de Ciudad Juárez 3 , 32584 Ciudad Juárez, Mexico
Carlos Velasco-Santos ORCID Tecnológico Nacional de México–Campus Querétaro, División de Estudios de Posgrado e Investigación 1 , 76000 Querétaro, Mexico

Resumen

A near-field electrospinning configuration has been developed to fabricate 3D structures by layer-by-layer stacking. The system or experimental setup consists of a high voltage source, a syringe pump, and the electrospinning equipment which has been designed and built. It works with Arduino Uno as a controller for adjusting the procedural parameters through OpenBuilds CONTROL software using a firmware preloaded on the Arduino Uno. The proposed experimental configuration consists of a collinear arrangement between the spinner and the sharp electrode, which move in the XY directions, keeping the same disposition; this arrangement is designed with the aim of manipulating the electric field (EF) and reducing instabilities associated with the process. The displacement speed (DS) and the distance of work adjust automatically to modify nanofiber features, which improves the flexibility of the system. In order to be efficient and set the EF profile, this was simulated using COMSOL Multiphysics® software. Nylon 6,6 polymeric fiber films have been electrospun to evaluate the efficiency of the system setup and the influence of parameters. The fiber morphology is studied by scanning electron microscopy and the chemical structure features are studied by infrared spectroscopy. Parameters such as voltage and DS are studied experimentally and analyzed to determine their effects on the control of fiber deposition. Stacking of up to 15 layers was obtained where the structural characteristics notably depend on the operating parameters.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

Juan A. de la Rosa Gatica; Ana L. Martínez Hernández; Nimrod Vázquez-Nava; Perla E. García-Casillas; Carlos Velasco-Santos. (2022). Design, development, and experimental setup of near-field electrospinning with a sharp electrode: Influence of procedural parameters on the 3D nanofiber structure. Review of Scientific Instruments, 93(1), 013906. https://doi.org/10.1063/5.0065101

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.