Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2021 · Catálogo consolidado

PROPUESTA DE CONTROLADOR APLICADO A UN CONVERTIDOR SEPIC CON TÉCNICA DE MPPT PARA GESTIÓN DE ENERGÍA DE NANO SATÉLITE DEL TIPO CUBESAT (PROPOSAL OF CONTROLLER APPLIED TO A SEPIC CONVERTER WITH MPPT TECHNIQUE FOR NANO SATELLITE ENERGY MANAGEMENT OF THE CUBESAT TYPE)

Pistas Educativas

José Pablo García Fernández Instituto Politécnico Nacional
Marcos Yair Bote Vázquez Instituto Politécnico Nacional
Leobardo Hernández González Instituto Politécnico Nacional
Jazmín Ramírez Hernández Instituto Politécnico Nacional

Resumen

Resumen El siguiente trabajo presenta el análisis teórico de los parámetros eléctricos de una celda solar monocristalina para una simulación en ambiente espacial, los cuales servirán de base para dimensionar la propuesta de un convertidor DC/DC del tipo SEPIC (Single Ended Primary Inductance Converter) multi rama que operará en modo continuo, el convertidor será operado por la técnica de control predictivo que se basa en el método numérico de Euler, que permite predecir los valores del voltaje a la salida de las celdas solares, para controlar el seguimiento del punto de máxima potencia, MPPT (Maximum Power Point Tracker) se utiliza el algoritmo de perturbación y observación. Se presentan resultados del modelo de celda solar donde se comparan parámetros eléctricos reales y parámetros obtenidos en condiciones de variación de irradiación y temperatura; como resultado del modelado del convertidor SEPIC; por último, se presentan los principales resultados de la técnica de control como respuesta ante variaciones de irradiancia que validan la correcta operación del convertidor propuesto. Palabras Clave: Control predictivo, CubeSat, MPPT, SEPIC multi rama. Abstract The following presents the theoretical analysis of the electrical parameters of a monocrystalline solar cell for a simulation in a space environment, which will serve as the basis for sizing the proposal of a multi-branch SEPIC (Single Ended Primary Inductance Converter) DC / DC converter that will operate in continuous mode, the converter will be operated by the predictive control technique that is based on the Euler numerical method, which allows predicting the voltage values at the output of the solar cells, the disturbance and observation algorithm is used to control the maximum power point tracking, MPPT (Maximum Power Point Tracker). Results of the solar cell model are presented where real electrical parameters and parameters obtained under conditions of irradiation and temperature variation are compared; as a result of the modeling of the SEPIC converter; Finally, the main results of the control technique are presented in response to irradiance variations that validate the correct proposed converter operation. Keywords: CubeSat, MPPT, multi-branch SEPIC, Predictive control.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

José Pablo García Fernández; Marcos Yair Bote Vázquez; Leobardo Hernández González; Jazmín Ramírez Hernández. (2021). PROPUESTA DE CONTROLADOR APLICADO A UN CONVERTIDOR SEPIC CON TÉCNICA DE MPPT PARA GESTIÓN DE ENERGÍA DE NANO SATÉLITE DEL TIPO CUBESAT (PROPOSAL OF CONTROLLER APPLIED TO A SEPIC CONVERTER WITH MPPT TECHNIQUE FOR NANO SATELLITE ENERGY MANAGEMENT OF THE CUBESAT TYPE). Pistas Educativas, 43(139). https://pistaseducativas.celaya.tecnm.mx/index.php/pistas/article/view/2665

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

Licencia en el registro de origen

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.