Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2026 · Catálogo consolidado

Renewable Energy Technology: Transient 3D CFD and Experimental Electrical Evaluation of a Cycloidal-Enhanced Rotor Versus a Savonius and Gorlov-Savonius Rotor with Blade Rotation Angle

Technologies

María Angélica Luján Vega ORCID Department Renewable Energy, Universidad Tecnológica de San Juan del Río, San Juan del Río 76800, Mexico
José Eli Eduardo González-Duran ORCID Automotive Engineering Department, Universidad Politécnica de Querétaro, Santiago de Querétaro 76240, Mexico
Juan Manuel Olivares-Ramírez ORCID Department Renewable Energy, Universidad Tecnológica de San Juan del Río, San Juan del Río 76800, Mexico
Leonel Estrada Rojo ORCID Departamento de Ingeniería Electrónica, TecNM/IT Celaya, Celaya 38010, Mexico
Jesus Alejandro Franco ORCID Department Renewable Energy, Escuela Nacional de Estudios Superiores Unidad Juriquilla, Universidad Nacional Autonoma de México, Mexico City 76230, Mexico
Juvenal Rodríguez Reséndiz ORCID Facultad de Ingeniería, Universidad Autónoma de Querétaro, Santiago de Querétaro 76010, Mexico

Resumen

This study presents a numerical and experimental analysis of vertical-axis Cycloidal rotors (RC) versus Savonius rotors (RS), with and without coupling to a Gorlov rotor (RG), designed to operate under low wind speed conditions of 2.5 m/s. Using transient Computational Fluid Dynamics (CFD), numerical mesh stability was evaluated as a function of rotor power, achieving convergence with 8,199,923 nodes and a stable angular momentum after 10 s. In the experimental phase, electrical characterization was conducted by coupling the rotors to a direct current generator, allowing for the determination of the optimal electrical load as a function of rotational speed (RPM). The results show that electrical power output and power coefficient (Cp) increased with rotational speed, reaching a maximum of 39.22 mW and Cp = 0.126 for the Cycloidal rotor (RCθR45), which exhibited the best overall performance. When coupling a Gorlov rotor with a torsion angle of 90° (RGθG90), maximum power of 52.45 mW and Cp = 0.168 were obtained for the hybrid configuration RC,θR0-RGθG90, confirming the aerodynamic and electrical performance improvement due to geometric coupling compared to a standalone Savonius rotor. The comparison between the numerical and experimental results showed consistent trends in Cp values, with slight deviations attributed to friction and alignment effects during physical testing. This study proposes an integrated methodology in renewable energy technologies that combines 3D transient CFD simulation with experimental characterization under variable electrical load conditions to determine the optimal operating power of novel Cycloidal rotors for low-wind-speed applications.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

María Angélica Luján Vega; José Eli Eduardo González-Duran; Juan Manuel Olivares-Ramírez; Leonel Estrada Rojo; Jesus Alejandro Franco; Juvenal Rodríguez Reséndiz. (2026). Renewable Energy Technology: Transient 3D CFD and Experimental Electrical Evaluation of a Cycloidal-Enhanced Rotor Versus a Savonius and Gorlov-Savonius Rotor with Blade Rotation Angle. Technologies, 14(1), 27. https://doi.org/10.3390/technologies14010027

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.