Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2018 · Catálogo consolidado

DESARROLLO DE UN DISPOSITIVO DE ENSAYOS MINIATURA DE PUNZONAMIENTO PARA DETERMINAR PROPIEDADES MECÁNICAS DE ACERO DE BAJA ALEACIÓN AL CROMO-NÍQUEL DEL ANCLAJE DE UN PUENTE (PUNCHING SHEAR MINIATURE TESTING DEVICE TO DETERMINE THE MECHANICAL PROPERTIES OF LOW CHROME-NICKEL STEEL OF A BRIDGE ANCHOR)

Pistas Educativas

Luis Alejandro Alcaraz Caracheo Tecnológico Nacional de México en Celaya
Erik López Vargas Tecnológico Nacional de México en Celaya
Elías Daniel Valadez González Tecnológico Nacional de México en Celaya
Gilberto Ruiz Mondragón Tecnológico Nacional de México en Celaya

Resumen

El conocer las propiedades mecánicas de un elemento estructural en servicio es fundamental para prevenir alguna posible falla, sin embargo una problemática que se puede presentar es la limitación de material necesario para fabricar las probetas bajo las normas convencionales. Por lo que es importante contar con un ensayo alternativo que permita determinar las propiedades de tensión empleando muestras pequeñas de material. En el presente trabajo se da a conocer el diseño y fabricación de un dispositivo para la técnica de ensayos miniatura de punzonamiento con el fin de evaluar las propiedades a tensión de un anclaje de acero de baja aleación al cromo-níquel de un puente atirantado ubicado en el Golfo de México. Con el dispositivo se busca extender el uso de la técnica y caracterizar otros materiales de elementos mecánicos donde se tenga como limitación la disponibilidad de material. Con la fabricación de los utillajes se pudo observar las ventajas de la prueba de punzonamiento miniatura y mediante la comparación de los resultados obtenidos se considera a los elementos, como satisfactorios en su servicio.Palabras clave: ensayo miniatura de punzonamiento, propiedades de tensión, acero colado, anclaje de acero cromo níquel. AbstractKnowing the mechanical properties of a structural element in service is essential to prevent any possible failure, however a problem that may arise is the limitation of material needed to manufacture the specimens under conventional standards. Therefore it is important to have an alternative test that allows to determine the tensile properties using small samples of material. In the present work, the design and manufacture of a device for the technique of miniature punching tests is presented in order to evaluate the tensile properties of a low alloy steel anchor to the chrome-nickel of a cable-stayed bridge located in the Gulf of Mexico. The device seeks to extend the use of the technique and characterize other materials of mechanical elements where the availability of material is limited. With the manufacture of the tools, the advantages of the miniature punching test were observed and by comparing the results obtained, the elements are considered as satisfactory in their service.Keywords: miniature punching shear test, tensile properties, cast steel, chromium nickel steel anchor.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

Luis Alejandro Alcaraz Caracheo; Erik López Vargas; Elías Daniel Valadez González; Gilberto Ruiz Mondragón. (2018). DESARROLLO DE UN DISPOSITIVO DE ENSAYOS MINIATURA DE PUNZONAMIENTO PARA DETERMINAR PROPIEDADES MECÁNICAS DE ACERO DE BAJA ALEACIÓN AL CROMO-NÍQUEL DEL ANCLAJE DE UN PUENTE (PUNCHING SHEAR MINIATURE TESTING DEVICE TO DETERMINE THE MECHANICAL PROPERTIES OF LOW CHROME-NICKEL STEEL OF A BRIDGE ANCHOR). Pistas Educativas, 40(130). https://pistaseducativas.celaya.tecnm.mx/index.php/pistas/article/view/1643

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

Licencia en el registro de origen

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.