Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Congreso · 2017 · Catálogo consolidado

Soft switching technique for the double buck-boost converter used in lighting applications

IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society

Pablo Guzman
Nimrod Vazquez
Rene Osorio
Hector Huerta

Resumen

In this paper, a soft switching technique for a LED driver based on an Integrated Double Buck-Boost (IDBB) converter is presented. The converter is a two-stage cascaded Buck-Boost topology featuring a single main switch and positive voltage output. The first stage is connected to the grid and it is operated in discontinuous conduction mode (DCM); working this way, a high power factor is naturally achieved. The second stage is used to improve the dynamic performance of the LED current by working in continuous conduction mode (CCM), which allows a low output current ripple in a 69W LED lamp. As an integrated converter, the power losses of the two stages are concentrated in the single transistor, when hard switching is used. The proposed soft switching technique consists on a lossless voltage active snubber and a current passive snubber, which allows the converter switching at zero voltage at the turn off, and at zero current during the turn on. Simulation and experimental results are shown.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

Pablo Guzman; Nimrod Vazquez; Rene Osorio; Hector Huerta. (2017). Soft switching technique for the double buck-boost converter used in lighting applications. IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, 2, 1550-1555. https://doi.org/10.1109/iecon.2017.8216263

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.