Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2020 · Catálogo consolidado

Real-Time Hardware in the Loop Simulation Methodology for Power Converters Using LabVIEW FPGA

Energies

Leonel Estrada ORCID Electronics Department, Instituto Tecnológico Superior del Sur de Guanajuato, Educación Superior 2000, Benito Juárez, 38980 Uriangato, Guanajuato, Mexico
Nimrod Vázquez ORCID Electronics Department, Tecnológico Nacional de México-IT de Celaya, Antonio García Cubas 600, Fovissste, 38010 Celaya, Guanajuato, Mexico
Joaquín Vaquero ORCID Electronics Technology Department, Universidad Rey Juan Carlos, Calle Tulipán, s/n, 28933 Móstoles, Madrid, Spain
Ángel de Castro ORCID Electronics Technology and Communications Department, Universidad Autónoma de Madrid, Ciudad Universitaria de Cantoblanco, 28049 Madrid, Spain
Jaime Arau ORCID Electronics Engineering Department, Tecnológico Nacional de México-CENIDET, Interior Internado, Palmira, 62490 Cuernavaca, Morelos, Mexico

Resumen

Nowadays, the use of the hardware in the loop (HIL) simulation has gained popularity among researchers all over the world. One of its main applications is the simulation of power electronics converters. However, the equipment designed for this purpose is difficult to acquire for some universities or research centers, so ad-hoc solutions for the implementation of HIL simulation in low-cost hardware for power electronics converters is a novel research topic. However, the information regarding implementation is written at a high technical level and in a specific language that is not easy for non-expert users to understand. In this paper, a systematic methodology using LabVIEW software (LabVIEW 2018) for HIL simulation is shown. A fast and easy implementation of power converter topologies is obtained by means of the differential equations that define each state of the power converter. Five simple steps are considered: designing the converter, modeling the converter, solving the model using a numerical method, programming an off-line simulation of the model using fixed-point representation, and implementing the solution of the model in a Field-Programmable Gate Array (FPGA). This methodology is intended for people with no experience in the use of languages as Very High-Speed Integrated Circuit Hardware Description Language (VHDL) for Real-Time Simulation (RTS) and HIL simulation. In order to prove the methodology’s effectiveness and easiness, two converters were simulated—a buck converter and a three-phase Voltage Source Inverter (VSI)—and compared with the simulation of commercial software (PSIM® v9.0) and a real power converter.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

Leonel Estrada; Nimrod Vázquez; Joaquín Vaquero; Ángel de Castro; Jaime Arau. (2020). Real-Time Hardware in the Loop Simulation Methodology for Power Converters Using LabVIEW FPGA. Energies, 13(2), 373. https://doi.org/10.3390/en13020373

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.