Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2022 · Catálogo consolidado

Asynchronous and Decoupled HIL Simulation of a DC Nanogrid

Electronics

Leonel Estrada ORCID Electronics Department, Instituto Tecnológico Superior del Sur de Guanajuato, Educación Superior 2000, Benito Juárez, Uriangato 38980, Mexico
Joaquín Vaquero ORCID Electronics Technology Department, Universidad Rey Juan Carlos, Calle Tulipán, s/n, Móstoles, 28933 Madrid, Spain
Alba Rodríguez-Lorente Electronics Technology Department, Universidad Rey Juan Carlos, Calle Tulipán, s/n, Móstoles, 28933 Madrid, Spain
Jaime Arau ORCID Electronics Engineering Department, Tecnológico Nacional de México, CENIDET, Interior Internado, Palmira, Cuernavaca 62490, Mexico
Angel de Castro ORCID Electronics Technology and Communications Department, Universidad Autónoma de Madrid, Ciudad Universitaria de Cantoblanco, 28049 Madrid, Spain
Alberto Sanchez ORCID Electronics Technology and Communications Department, Universidad Autónoma de Madrid, Ciudad Universitaria de Cantoblanco, 28049 Madrid, Spain
Nimrod Vazquez ORCID Electronics Department, Tecnológico Nacional de México, Instituto Tecnológico de Celaya, Antonio García Cubas 600, Fovissste, Celaya 38010, Mexico

Resumen

In this paper, an asynchronous and decoupled Hardware-In-the-Loop simulation of a DC nanogrid is presented. The DC nanogrid is a recent way to solve problems presented in traditional power generation, such as low efficiency, pollution, and cost increase. The complexity of this kind of system is high due to the interconnection of all the composing elements, making the use of HIL simulation attractive due to its advantages regarding computational power and low solution time. However, when a nanogrid is simulated in commercial and personalized platforms, all the elements presented are solved at the same integration time, even if some elements could be solved at smaller integration times, causing a slowdown of the system solution. The results of the asynchronous HIL simulation are compared with a synchronous HIL simulation with an integration time of 425 ns, and also with an offline simulation performed in PSIM software. The proposal achieves an integration time of 200 ns for the fastest element and 425 ns for the slowest, with an error of less than 0.2 A for current signals and less than 2 V for voltage signals. These results prove that the asynchronous and decoupled solution of an HIL simulation for nanogrid is possible, allowing each element to be solved as fast as possible without affecting the accuracy of the result, as well as simplifying programming.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

Leonel Estrada; Joaquín Vaquero; Alba Rodríguez-Lorente; Jaime Arau; Angel de Castro; Alberto Sanchez; Nimrod Vazquez. (2022). Asynchronous and Decoupled HIL Simulation of a DC Nanogrid. Electronics, 11(13), 2045. https://doi.org/10.3390/electronics11132045

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.