Instituto Tecnológico de Celaya Tecnológico Nacional de México
ITC Investigación ITC
Explorar publicaciones
Artículo · 2023 · Catálogo consolidado

A Comparative Analysis of the Lubricating Performance of an Eco-Friendly Lubricant vs Mineral Oil in a Metallic System

Coatings

J. Santos García-Miranda ORCID Mechanical Engineering Department, Tecnológico Nacional de México/IT de Celaya, Celaya 38010, Mexico
Luis Daniel Aguilera-Camacho ORCID Mechanical Engineering Department, Tecnológico Nacional de México/IT de Celaya, Celaya 38010, Mexico
María Teresa Hernández-Sierra ORCID Mechanical Engineering Department, Tecnológico Nacional de México/IT de Celaya, Celaya 38010, Mexico
Karla J. Moreno ORCID Mechanical Engineering Department, Tecnológico Nacional de México/IT de Celaya, Celaya 38010, Mexico

Resumen

Eco-friendly lubricant research continues to increase since it has a comparative performance to commercial mineral lubricants to overcome the effects of environmental impact. However, the efficiency of these green lubricants depends on specific applications. In this study, we analyzed the friction and wear performance of a castor/sesame oil mixture as an eco-friendly lubricant and its comparison to a commercial mineral lubricant tested in a metallic system employed in bearing elements. For this purpose, AISI 8620 steel against ISO 100Cr6 was used as tribological pair. The friction and wear tests were carried out through a Tribometer of ball-on-disk configuration under boundary lubricating conditions, whereas the worn surfaces were investigated by using optical and electron microscopy. The physical properties and the rheological properties of the lubricants were also determined. The friction and wear performance between the eco-friendly lubricant and mineral oil were similar so that the CLE were comparable. The CLE values in terms of friction and wear ranged from 86% to 99.4%, respectively.

Datos de publicación

Cita esta publicación

Comprueba el estilo que requiere tu institución o revista.

J. Santos García-Miranda; Luis Daniel Aguilera-Camacho; María Teresa Hernández-Sierra; Karla J. Moreno. (2023). A Comparative Analysis of the Lubricating Performance of an Eco-Friendly Lubricant vs Mineral Oil in a Metallic System. Coatings, 13(8), 1314. https://doi.org/10.3390/coatings13081314

Fuentes y trazabilidad

Se conserva la procedencia de los datos y se da prioridad a la revista cuando existe información editorial.

Licencias declaradas por las fuentes

https://creativecommons.org/licenses/by/4.0/

Descargar ficha bibliográfica

El PDF contiene los metadatos y el enlace al trabajo original.